Feature Ply (AC, BB, BC)
Sought for their decorative appearance qualities, feature grade hoop or radiata plys can be a stunning addition to any fitout. Typically free of defects such as splits, large knots and putty the purity of the face veneer leaves a lasting impression.
Commonly finished in a clear to highlight the face, Feature Ply is ideal for use in broad range of structural* and non-structural applications including decorative ceiling and wall linings, whether left solid, slotted or perforated with small holes.
An ideal decorative product for use in noise containment or attenuation applications.
If used externally or in applications exposed to moisture, it is recommended the panel is treated and sealed against fungal and termite attack with a recognised H3 treatment and finished with a paint or water repellent to minimise surface checking.
*When used as a structural product, care must be taken to comply with the relevant building and engineering codes based on the panel’s structural rating.
Overview
Applications | Ceilings Wall panels Internal sound panels Inset feature panels Furniture and cabinetry Boat Fitout Musical Instruments |
Standard | AS/NZS 2271 & AS/NZ 2269 where structurally rated |
Grade | Various – F8, F11, F14 and F17; AC, BB, BC; Exterior ‘A’ bond. |
Sheet Size | 2400 x 1200 2700 x 1200 |
Thickness | 4mm 6mm |
Bendy Ply
Branch out, you don’t always have to walk the straight line! Bendy Ply is a unique plywood sheet that has the ability to curve and bend around a very tight radius and bring to life your decorative ideas.
The versatility of Bendy Ply leads to it being widely used in a range of applications such as reception counters, columns and feature displays.
The high grade face is cut in two directions to give you the option of a long or short grain. Both are ideal for clear finishing or painting. Bendy ply is also suitable for overlaying with a natural timber veneer.
Bendy ply is interior non-structural plywood. It is not suitable for structural and wet area applications.
Overview
Applications | Shop Fitting Furniture Ceiling linings Movie and Theatre sets Interior door skins |
Grade | B face / D back; Interior ‘C’ Bond |
Sheet Size | 2440 x 1220 Long Grain 1220 x 2440 Short Grain |
Thickness (Sheets/pack) | 5mm(107) 8mm(105) |
Lauan Ply
A decorative hardwood ply with earthy pink/brown tonings. Typically a subtle and consistent grain that is a reliable choice when the appearance of the face is important. Easy to work with, paint or stain. Ideal for furniture and crafts.
Not suitable for structural applications or exterior use.
Overview
Applications | Interior walls; movie and theatre sets; furniture backing, interiors and drawers; picture frames and crafts |
Grade | B face / C back; ‘C’ Bond |
Sheet Size | 2440 x 1220 |
Thickness (Sheets/pack) | 2.7mm(300) 3mm(300) 3.6mm(240) |
Lightweight Falcata
Being up to 38% lighter than standard hardwood plywoods, Falcata can deliver significant weight savings in an interior fitout. Ideally suited for lightweight joinery applications such as laminated benchtops substrate and bench seats in caravans.
Falcatta is typically of lighter appearance than many traditional hardwood species with a clear face and a subtle grain.
Made with an interior moisture proof bond to support longevity in use. Not suitable for structural applications or exterior use.
Safe and easier to handle, Falcata’s lightweight capabilities helps to address workplace fatigue for production and fit out staff.
Overview
Applications | Caravan and shop fitout, ceiling and wall panelling, door cores, acoustic and decorative panels, lightweight furniture |
Weight | Full Falcata (Face , Back and Core ) – LITE PLY F Combi Falcata (Face & Back MLH, Core Falcata) – LITE PLY – MWEIGHT DETAILS (both F and M variants)
|
Grade | BB/CC. (BB/BB special order); WBP bond |
Sheet Size | 2440 x 1220 |
Thickness (Sheets/pack) | 2.7mm(380) 12mm(90) 15mm(73) 18mm(62) |
Polyester & Paper Overlaid Ply
Plywood with a decorative overlay that combines aesthetic appeal with easy routine cleaning and maintenance properties.
Available in a range of colours including White & Grey Embossed (polyester overlay) and Silver Cloud (paper overlay) with a matte or gloss finish. Minimum quantities and lead times apply to non-stocked colours. Please call your local branch for further information.
Routine cleaning simply involves wiping with a clean, damp soft cloth. Never use abrasive cleaners, scourer pads (eg: wire or copper cleaning pads) or sandpaper, or subject to excessive wetting.
Not recommended for use in wet areas or spaces with high relative humidity. Not suitable for structural applications or exterior use. It is recommended that panels are inspected for colour variation prior to installation.
Overview
Applications | Wall panelling Ceilings Draw linings |
Standard | AS / NZS 2270 |
Grade | B Face (Polyester overlaid) C Back; ‘C’ Bond (Interior Bond) |
Sheet Size | 2440 x 1220 2745 x 1220 2995 x 1220 3050 x 1220 3660 x 1220 Metric sizes also available |
Thickness | 3.6mm |
Plywood Doorskins
Hardwood plywood Door Skins are commonly specified where high quality faces are required, for example decorative or commercial doors.
There is a choice of standard and premium skins when considering the look you want to achieve. The premium grade is typically suitable for clear finishing and the standard grade is ideally finished with a painted surface.
It is recommended that potential customers contact a representative from a Coating Company (Paint/Staining) in conjunction with an AWP Representative prior to specifying the coating applications for their Door Skins.
Overview
Applications | Outer faces of doors |
Standard | AS / NZS 2271 |
Grade | A face / D back; JAS type 1 Bond |
Sheet Size (Sheets/pack) | 2058 x 838 (170) 2135 x 938 (170) 2135 x 1220 (170) 2440 x 938 (170) 2440 x 1220 (240) 3050 x 1220 (240) |
Thickness | 3.6mm |
BB/CC Plywood
BB/CC hardwood ply is a very popular feature plywood choice for applications where the appearance of the face is important, but the back is less important. For example furniture, signs, movie sets, feature walls.
The faces have been sanded to make staining or painting easier, noting that as a natural product, colour variations will exist between sheets. The colour may range from a dark red to light blonde in appearance.
Manufactured using an ‘A’ bond resin, BB/CC is suitable for a range of applications involving some external exposure. It is recommended though that for applications involving long term full exposure, the panel is treated and sealed against fungal and termite attack with a recognised H3 treatment and finished with a paint or water repellent to minimise surface checking.
Whilst BB/CC is a non-structural plywood, being manufactured from 100% hardwood, the product is quite naturally durable and strong.
The BB face may at times have small filled and sanded imperfections.
Overview
Applications | Wall and ceiling linings, furniture, partitions, movie sets, signs, packaging, cubby houses, horse stable and float fitouts, letter boxes, shelving |
Standard | EN 13986 |
Grade | B face / C back, ‘A’ Bond |
Sheet Size | 2440 x 1220 3050 x 1220 (12 & 18mm only) |
Thickness (Sheets/pack) | 3.6mm(170) 6mm(145) 9mm(95) 12mm(70) 15mm(55) 18mm(45) 25mm(33) |
Plywood Cladding
SHADOWclad decorative structural plywood cladding is a stylish and versatile building product suitable for both outdoor and indoor building applications. Favoured by architects, designers and builders alike for its strength, durability and appearance, SHADOWclad allows you to achieve a beautiful façade without an expensive price tag.
SHADOWclad can be used in a broad range of external applications once sealed with a suitable paint or stain system and installed to recommended guidelines. It has been treated with LOSP (H3) to help protect the cladding from both insect (termite) and fungal (rot) attack.
With the panels being light weight in relation to other cladding options, it is ideally suited to projects constructed on sloping blocks. No special tools are required and with inherent bracing strength, SHADOWclad can eliminate the requirement for another bracing product in the construction process.
SHADOWclad is available in either primed (beige) or natural look with a textured or grooved finish and is manufactured from plantation pine timber, a renewable resource.
(SHADOWclad ® is a trademark of Carter Holt Harvey Wood products)
Overview
Applications | Exterior or interior cladding, high impact wall linings, feature inlays, soffits, garage, sheds, stables and agricultural buildings. Grooves – 9mm wide, 5 deep 150mm centres |
Standard | AS/NZS 2269 & EWPAA JAS/ANZ accredited |
Grade | F8; ‘A’ Bond; less than 0.3mg/l Formaldehyde (SE0) |
Sheet Size | 2440 x 1216 2745 x 1216 |
Thickness | 12mm(45 sheets/pack) |