Australian Native HERRINGBONE

Australian Native Herringbone flooring evokes an organic, natural warmth that enhances any space.

Australian Native Herringbone is available pre-finished in six species: Blackbutt, Rustic Blackbutt, Spotted Gum, Brush Box, QLD Spotted Gum, and Sydney Blue Gum.

Featuring a micro-bevel edge profile and finished with a modern matte smooth surface, this flooring achieves an earthy and effortless look.

Consistent in quality and structural stability, Australian Native Herringbone is constructed using a low-shrinkage, eco-friendly Hevea core and a tough Australian hardwood lamella.

Utilising the latest in environmentally friendly UV coatings, the Bona Lacquer System delivers a floor finish similar to a stylish oiled floor but with the durability and protection of a UV lacquer.

Australian Native Herringbone engineered flooring provides a wow factor for any interior space.

Please note that installing Australian Native Herringbone requires a high level of skill, and Hurford’s recommends only qualified tradespeople with the relevant expertise undertake the installation.

Species: Blackbutt, Rustic Blackbutt, Spotted Gum, Brush Box, QLD Spotted Gum & Sydney Glue Gum
Core Material: Hevea
Locking System: Tongue and Groove (Sides & Ends)
End Profile: End Matched
Edge Profile: Micro Bevel
Size: 120mm
Thickness: 14mm (Lamella Nominal 4mm)
Length: 600mm
Surface: Smooth
Coating: Bona UV Lacquer System
Coverage: 0.576 m²/box
Packaging: 8 pieces per box – 4 Set A (left) & 4 Set B (right)
Install Suitability: Direct glued
Install Sub-Floor Heating: No
Install Over: Wood, concrete, plywood & plywood over concrete
Colour Match Accessories: Yes

Australian Native Herringbone
Technical Information & Test Downloads

Brochure: Australian Native Herringbone Brochure

Warranty: Australian Native Herringbone Warranty

Slip test: Australian Native Herringbone Slip Test

Emissions test available upon request.

Floor Care Link: General Maintenance Information

Hurford’s Australian Native Engineered Hardwood Flooring is produced with the knowledge and experience of three generations of processing and drying Australia’s unique Spruce. Hurford’s superior kiln drying processes help to minimise lamella movement, preventing potential stability issues like twisting, cupping and checking.

Please Note: Images are not always an accurate representation of the normal colour tones of a species. Please speak with your local Hurford’s supplier for samples. If you do not know your closest Hurford’s supplier or are unable to acquire your desired samples, please email us at [email protected].