Create a striking custom showpiece from the floor up using Hurford Herringbone engineered parquet flooring.
Each block of Hurford Herringbone is carefully constructed using a prime grade Oak lamella for the wear layer, which is bonded to a strong Eucalyptus plywood core and stabilised with a veneer backing.
ADD A CUSTOMISED STAIN AND FINISH.
Hurford Herringbone has been produced leaving an unfinished, uncoated RAW surface. RAW is the ideal selection to achieve a custom design vision, with limitless choices of stains and finishes to reflect one’s personal taste or style.
“Installing Hurford Herringbone requires a high level of skill and Hurford Flooring recommends only qualified tradespeople with the relevant skill levels undertake the installation.”
Species: Oak
Colour Stains: RAW (Unfinished)
Appearance: Prime
Core Material: Plantation Eucalyptus Plywood
Locking System: Tongue & Groove (Sides & Ends)
Profile: Square Edge (Sides & Ends)
Size: 600mm x 120mm
Thickness: 14mm (Lamella Nominal 3mm)
Surface: Smooth, lightly sanded
Coating: Uncoated
Finish: Unfinished
Coverage: 1.7m2 per box
Packaging: 24 pieces per box
Install Method: Full bed adhesive fix
Suitable Subfloors: Concrete Slab, Plywood and Particleboard. May be installed over subfloor heating.
Hurford Herringbone
Technical Information & Test Downloads
Brochure: Hurford Herringbone Brochure
Warranty: Hurford Herringbone Warranty
Fire Test: Hurford Herringbone Fire Test
Emissions test available upon request.
Floor Care Link: General Maintenance Information