Cypress Products Specification

SPECIFICATION Grade Sizes

GRADE

F7
Visually stress graded, a suitable choice for use in decks and pergolas. Often preferred by builders for its strength, flex and cost qualities. Refer to appropriate span tables for load capacity and spanning ability, these will indicate what end sections can span over a set length, at a specific spacing.

Variations in Timber

Timber is a spectacular and versatile natural material. It yields a vast degree of variety in colour, texture and naturally occurring feature. This diversity can be apparent even between pieces selected from batches of the same species. Finishing can also effect variation in colour and may even highlight subsurface feature.

 

Hurford Wholesale recommends that care be taken when making a preference selection based on a single sample piece or a small area sample. In all cases, timber supplied will deviate in appearance between jobs and display samples. However, it is this deviation that makes all timber products absolutely unique.


NOTE:  Please confirm availability before specifying or ordering.

SIZES

The table below is a sizing guide to some of Hurford’s Cypress products.

Cypress Pine Flooring
62 x 20mm 85 x 20mm 98 x 20mm 100 x 20mm 108 x 20mm 133 x 20mm
Cypress Seasoned Decking
90 x 21mm 118 x 21mm
Cypress Chamfer
100 x 25mm 150 x 25mm
Cypress Sawn Unseasoned F7 Structural (mm)
50 x 25 38 x 38 50 x 50 75 x 75 100 x 100 125 x 125
75 x 25 50 x 38 75 x 50 100 x 75 125 x 100 150 x 125
100 x 25 75 x 38 100 x 50 125 x 75 150 x 100 175 x 125
125 x 25 100 x 38 125 x 50 150 x 75 175 x 100 200 x 125
150 x 25 125 x 38 150 x 50 175 x 75 200 x 100
175 x 25 150 x 38 175 x 50 200 x 75 150 x 150
200 x 25 175 x 38 200 x 50 175 x 175
200 x 38 200 x 200

 

Don’t see the sizes you’re looking for here? Please contact your state office.

NOTE: Sizes may not be applicable to all grades. Please confirm availability before specifying or ordering.

DOWNLOADS & LINKS DOWNLOADS & LINKS